Dash cam stops recording suddenly
Thank you for purchasing the SCADVR18 FULL HD 1080P Dash Cam. This Dash Cam is specifically designed for real time video and audio recording when driving. The Dash Cam simply mounts to the windscreen and records footage onto a Micro SD memory card. It has a G-sensor with Product overview Product features. ORSKEY Dash Cam 1080P Car DVR Dashboard Camera Full HD 170 Wide Angle with 3.0″ LCD Display, WDR, Loop Recording, Motion Detection and G-Sensor. Product Features. 2 Responses to ORSKEY Dash Cam 1080P Car DVR Dashboard Camera Full HD 170 Wide Angle with 3.0″ LCD Display, WDR. View and Download Falcon 1080P HD Car Dash Cam user manual online. 1080P HD Car Dash Cam dash cameras pdf manual download.
Turn off motion detection feature. For smaller SD cards, this feature will stop recording whenever no motion is detected in front of the camera. When movement is detected the camera will start recording again. For larger SD cards this feature is not required.
Dash camera's screen goes blank
Turn off the back light or enable power save function. This feature will switch off the LCD screen after a selected time in order to reduce distraction at night. This may give the impression recording has stopped but it will still be recording in background.
Camera does not start recording after ignition switched on
This can happen if the internal battery is heavily discharged. If the camera has not been used for some time and the internal battery is fully discharged, it may take a few minutes before there is sufficient energy from the power adapter to charge the battery and power the dash camera.
The car DVR / dash cam recording is intermittent
Wdr Full Hd 1080p Dash Cam Manual
● Check your SD card speed: use a SD card with a speed of at least Class6. If the card recording is not fast enough files may become corrupted.
● Make sure the SD card is not fake: there are some fake SD cards on the market, which may not perform to their specified speed and cause recording problems, especially when recording at Full HD resolution.
If you wish to check the speed of an SD card there are programs available such as HD Tune which can confirm the data transfer rate. The table below shows expected transfer rates for each class of SD card. Highlighted in red are speeds for the Class6 & Class10 cards recommended for use with common dash cameras.
● Make sure the SD card is compatible with camera.
● Make sure the SD card used is not UHS -Ultra High Speed type (indicated by a number inside a 'U'), as these may not be compatible with the current dash cameras.
● Check power supply.
● Ensure that the 12V power adapter is securely fitted into the car power socket, the LED is always illuminated, the engine is switched on. If the LED flickers or goes out during use, then the power adapter may not be securely fitted into the socket, causing the camera to power off.
● Check whether the fuse in the end of the adapter is not blown. Check the cable for damage, which may have caused the fuse to blow.
● Check 12V power socket on Stop/Start vehicles.
● If you have a stop/start vehicle, amke sure that the 12V power socket does not power down when the vehicle enters stop/start mode. If this happens the dash camera will switch off too.
The dash cam's screen displayed 'Card Full/Error'
Wdr Full Hd 1080p Dash Cam Instructions
'Card Full': if the loop recording function is enabled the dash cam will operate properly and the oldest files wiull be automatically deleted, otherwise this message will appear on the screen everytime the card becomes full. To avoid this problem set the length of each video clip to 3 or 5 minutes.
'Card Error': the SD card is corrupted. Remove useful files then re-format the card using the camera menu option.
| You may also want to read: |
| Dash cam troubleshooting guide |
| Seeing is believing: can I use my cell phone as a dash cam? |
Thank you for purchasing the SCADVR18 FULL HD 1080P Dash Cam. This Dash Cam is specifically designed for real time video and audio recording when driving. The Dash Cam simply mounts to the windscreen and records footage onto a Micro SD memory card. It has a G-sensor with Product overview Product features. ORSKEY Dash Cam 1080P Car DVR Dashboard Camera Full HD 170 Wide Angle with 3.0″ LCD Display, WDR, Loop Recording, Motion Detection and G-Sensor. Product Features. 2 Responses to ORSKEY Dash Cam 1080P Car DVR Dashboard Camera Full HD 170 Wide Angle with 3.0″ LCD Display, WDR. View and Download Falcon 1080P HD Car Dash Cam user manual online. 1080P HD Car Dash Cam dash cameras pdf manual download.
Turn off motion detection feature. For smaller SD cards, this feature will stop recording whenever no motion is detected in front of the camera. When movement is detected the camera will start recording again. For larger SD cards this feature is not required.
Dash camera's screen goes blank
Turn off the back light or enable power save function. This feature will switch off the LCD screen after a selected time in order to reduce distraction at night. This may give the impression recording has stopped but it will still be recording in background.
Camera does not start recording after ignition switched on
This can happen if the internal battery is heavily discharged. If the camera has not been used for some time and the internal battery is fully discharged, it may take a few minutes before there is sufficient energy from the power adapter to charge the battery and power the dash camera.
The car DVR / dash cam recording is intermittent
Wdr Full Hd 1080p Dash Cam Manual
● Check your SD card speed: use a SD card with a speed of at least Class6. If the card recording is not fast enough files may become corrupted.
● Make sure the SD card is not fake: there are some fake SD cards on the market, which may not perform to their specified speed and cause recording problems, especially when recording at Full HD resolution.
If you wish to check the speed of an SD card there are programs available such as HD Tune which can confirm the data transfer rate. The table below shows expected transfer rates for each class of SD card. Highlighted in red are speeds for the Class6 & Class10 cards recommended for use with common dash cameras.
● Make sure the SD card is compatible with camera.
● Make sure the SD card used is not UHS -Ultra High Speed type (indicated by a number inside a 'U'), as these may not be compatible with the current dash cameras.
● Check power supply.
● Ensure that the 12V power adapter is securely fitted into the car power socket, the LED is always illuminated, the engine is switched on. If the LED flickers or goes out during use, then the power adapter may not be securely fitted into the socket, causing the camera to power off.
● Check whether the fuse in the end of the adapter is not blown. Check the cable for damage, which may have caused the fuse to blow.
● Check 12V power socket on Stop/Start vehicles.
● If you have a stop/start vehicle, amke sure that the 12V power socket does not power down when the vehicle enters stop/start mode. If this happens the dash camera will switch off too.
The dash cam's screen displayed 'Card Full/Error'
Wdr Full Hd 1080p Dash Cam Instructions
'Card Full': if the loop recording function is enabled the dash cam will operate properly and the oldest files wiull be automatically deleted, otherwise this message will appear on the screen everytime the card becomes full. To avoid this problem set the length of each video clip to 3 or 5 minutes.
'Card Error': the SD card is corrupted. Remove useful files then re-format the card using the camera menu option.
| You may also want to read: |
| Dash cam troubleshooting guide |
| Seeing is believing: can I use my cell phone as a dash cam? |
For the purpose of this new article, the featured image(s) were sourced from the internet. For any issue, please contact us, and we will deal with the matter promptly.
